Description
Ajax AJ-FIREPROTECTPLUS-W - Smoke detector with temperature and carbon monoxide sensors.
The Ajax AJ-FIREPROTECTPLUS fire detector is a wireless detector with temperature and carbon monoxide sensors that monitors the safety of the room 24 hours a day and immediately raises the alarm when it detects dangerous levels of carbon monoxide, smoke or a sudden rise in temperature.
How it works
The device detects smoke using a chamber with a photoelectric sensor. An additional chemical element detects carbon monoxide and triggers the alarm.
Features
It can operate independently of the control panel (hub), sounding a fire alarm through its built-in siren. Several detectors can raise the alarm simultaneously.
Installation and setup
Ready to work straight out of the box: the battery is pre-installed, so there is no need to open the detector. It connects to the control panel (hub) with a single tap in the mobile app, and can be fitted to the SmartBracket in just a few minutes.
Description:
- Smoke detector with temperature and carbon monoxide sensors
- Two-way communication
- Wireless 868 MHz Jeweller
- Internal antenna, open-space range 1300 m
- 85 dB alarm
- Indicates smoke detection, rapid temperature rise and excess temperature
- Anti-opening tamper
- Supports standalone operation
- Powered by 2 CR2 batteries / 1 CR2032 3.0 V battery (approx. 4-year life)
- Indoor use
- Mount included
- White
Technical specifications:
- Brand: Ajax
- Technology: Photoelectric sensor
- CO sensor: 3 response intervals depending on CO concentration
- Frequency: 868 MHz Jeweller
- Transmission range: ≤ 1300 m in open space
- Sound level: 85 dB
- Alarm: Light and sound
- Housing material: ABS plastic
- Battery: 2 CR2 batteries / 1 CR2032 3.0 V battery (approx. 4-year life)
- Operating temp.: 0°C ~ 65°C
- Dimensions: 132 (H) x 132 (W) x 31 (D) mm
- Weight: 220 g
